Wire And Cable Structural Materials
Jan 10, 2022
The vast majority of wire and cable products are long strip products with exactly the same cross-section (cross-section) shape (ignoring the errors caused by manufacturing), which is determined by the characteristics used as lines or coils in the system or equipment. Therefore, to study and analyze the structural composition of cable products, we only need to observe and analyze its section.
The structural elements of wire and cable products can be divided into four main structural components: conductor, insulating layer, shielding and protective layer, as well as filling elements and tension bearing elements. According to the use requirements and application occasions of products, some products have very simple structure.
2. Cable material
In a sense, wire and cable manufacturing industry is an industry of material finishing and assembly. First, the material consumption is huge, and the material cost of cable products accounts for 80-90% of the total manufacturing cost; Second, there are many types and varieties of materials used, and the performance requirements are particularly high. For example, copper for conductor is required to have a purity of more than 99.95%, and some products should use oxygen-free high-purity copper; Third, the selection of materials will have a decisive impact on the manufacturing process, product performance and service life.
At the same time, the benefits of wire and cable manufacturing enterprises are also closely related to whether materials can be saved scientifically in material selection, processing and production management.
Therefore, the design of wire and cable products must be carried out at the same time as the selection of materials. Generally, several materials are selected and determined after process and performance screening test.
Materials for cable products can be divided into conductive materials, insulating materials, filling materials, shielding materials, protective layer materials, etc. according to their use parts and functions. But some of these materials are common to several structural members. In particular, thermoplastic materials, such as polyvinyl chloride and polyethylene, can be used on insulation or sheath as long as some formula components are changed.
The categories of materials used in the manufacture of cable products are very wide, and there are many varieties, specifications (brands).
3. Name and material of product structure
(1) Wire: the most basic and essential component of the product for current or electromagnetic wave information transmission.
Main materials: conductor is the abbreviation of conductive wire core. It is made of non-ferrous metals with excellent conductivity such as copper, aluminum, copper-clad steel and copper-clad aluminum. Optical fiber is used as conductor.
Bare copper wire and tinned wire; Single branch line and stranded wire; Tinned wire after stranding.
(2) Insulation layer: it is a component wrapped around the periphery of the conductor and plays the role of electrical insulation. That is, it can ensure that the transmitted current or electromagnetic wave and light wave only travel along the conductor and do not flow to the outside, and the potential on the conductor (i.e. the potential difference formed to the surrounding objects, i.e. voltage) can be isolated, that is, it is necessary to ensure the normal transmission function of the conductor and the safety of external objects and people. Conductor and insulating layer are two basic components that must be included in cable products (except bare wires).
Main materials: PVC, PE, XLPE, polypropylene, PP, fluoroplastic F, rubber, paper, mica tape
(3) Filling structure: many wire and cable products are multi-core. After these insulated cores or pairs are cabled (or grouped for multiple times), one is that the shape is not round, and the other is that there is a large gap between the insulated cores. Therefore, the filling structure must be added during cable forming. The filling structure is to make the outer diameter of the cable relatively round, so as to facilitate tape wrapping and sheath extrusion.
Main material: PP rope
(4) Shielding: it is a component to isolate the electromagnetic field in cable products from the external electromagnetic field; Some cable products also need to be isolated from each other between different wire pairs (or wire groups). It can be said that the shielding layer is an "electromagnetic isolation screen". Conductor shielding and insulation shielding of high voltage cables are to homogenize the distribution of electric field.
Main materials: bare copper wire, copper clad steel wire, tinned copper wire
(5) Sheath: when wire and cable products are installed and run in various environments, they must have components that protect the product as a whole, especially the insulating layer, which is the sheath.
Because the insulating material is required to have excellent electrical insulation properties, the purity of the material must be very high and the impurity content must be very small; It is often unable to take into account its ability to protect the outside world. Therefore, various protective layer structures must bear the bearing or resistance to various external mechanical forces (i.e. installation, use occasions and in use), atmospheric environment resistance, chemical or oil resistance, prevention of biological invasion, and reduction of fire hazards.
Main materials: PVC, PE, rubber, aluminum, steel strip
(6) Tensile element: the typical structure is steel cored aluminum strand, optical fiber cable, etc. In short, the tensile element plays a major role in the special small and soft products developed, which require multiple bending and twisting.
Main material: steel wire







