Basic Requirements For The Appearance Of Wire And Cable Products
Apr 09, 2022
(1) Round aluminum rod
It is required to check the degree of roundness, whether there are defects such as folds, misrounds, cracks, inclusions, kinks, and serious mechanical damage scars, pits, peeling, flashing, corrosion spots, etc.
(2) Round copper wire
Check whether the surface is smooth and clean, whether there are triangular mouths, burrs, cracks, folds and inclusions and serious scars, pits, corrosion spots of mechanical damage, etc. It is worth mentioning that there is also the degree of oxidation of the copper wire. Generally, golden yellow is normal, light red is slightly oxidized, and the surface is dark red and blue, which is serious oxidation. Any serious oxidation should be judged as waste disposal. There are many cases of aluminum wire in the manufacturing process, and it should be strictly controlled when making overhead transmission lines.
(3) Aluminum line surface
The wires of wire and cable products should be twisted tightly and neatly, and there should be no looseness, kinking of single wires, jumping out or bulging of single wires and breaking of single wires.
In addition, the welding part of the single-wire joint should be rounded and the welding has required anti-corrosion treatment. Generally, the enlarged part of the joint should not exceed twice the diameter tolerance. The welding place should not be less than 15 meters, the distance between the two welding places of the same layer is not the same single wire, the inner layer should not be less than 5 meters, and the outer layer should not be less than 15 meters. When the copper core is a single copper wire, welding is not allowed.







