Application And Characteristics Of CAT6 Ethernet Cable

A new performance evaluation index of CAT6 Ethernet cable is determined. 23AWG single core bare copper is used as the conductor, polyethylene polymer material is used as the insulator, and the skin material is flame retardant polymer material with gray color; The twisted pair meets the requirements of international specifications (ISO / IEC), and its electrical characteristics exceed the requirements of class VI (cat. 6). The cross isolation of the cable center ensures the next performance and reasonable construction bending radius. LSZH: Represents "low smoke and zero halogen". Low smoke and zero halogen materials can meet the requirements of safety and environmental protection.

The cross skeleton in the center of CAT6 Ethernet Patch Cable rotates at an angle with the change of length. Four pairs of twisted pairs are clamped in the groove of the skeleton to maintain the relative position of the four pairs of twisted pairs and improve the balance characteristics and crosstalk attenuation of the cable. In addition, ensure that the balance structure of the cable is not damaged during installation. The bare copper wire diameter of category VI unshielded twisted pair is 0.57mm (wire gauge is 23AWG), the insulated wire diameter is 1.02mm, and the diameter of STP cable is 6.53mm.

It can be used for voice, integrated service data network (ISDN), atm155mbps and 622Mbps, 100Mbps tpddi, fast Ethernet and Gigabit Ethernet; it has the characteristics of longer transmission distance, less transmission loss, wear resistance and strong compression resistance than Class V and super class v.