Packaging, Transportation And Storage Of High-voltage Power Cables

1. Cable reels are used for cable packaging in cable factories. There are iron reels, wooden reels and iron-framed wooden reels. The outer diameter of the reels has a greater impact on the cost of transportation and storage. The diameter of the reels used for cables of 10kV and below is 3.2 It is better to be below meters, and the width of the plate should not exceed 2.2 meters. For those exceeding 3.5 meters, a special delivery vehicle should be used.

2. The weight of each coil is related to the standard type and length of the cable. Generally, the length of a single coil of medium and low voltage cables is about 500 meters, and the weight is 3-10 tons.

3. In the process of transportation, loading and unloading, cables and cable reels should not be damaged. It is strictly forbidden to push the cable reel directly from the car. Cable reels should not be transported or stored flat.

4. Before transporting or rolling the cable reel, make sure that the cable reel is strong and the cable is wound tightly. When rolling, you must follow the arrow on the cable reel or the tight direction of the cable.