Causes of power cable insulation failure
Jan 20, 2021
1. Insulation hinders. The insulation aging of power cables mainly occurs in the later period of operation, and generally occurs in cable lines that have been in operation for more than 15 years, resulting in a significant increase in cable obstruction rate. Insulation aging is mainly divided into dendritic aging, electrothermal aging and insulation material aging. Under the effect of the electric field, the air gap in the cable insulation medium dissociates, causing the insulation to drop. When the insulating medium is ionized, chemical substances such as ozone and nitrate drums are generated in the air gap, which corrode the insulating layer. At the same time, the moisture in the insulation layer causes the insulation fiber to differentiate, resulting in a decrease in insulation strength. Overheating will accelerate the deterioration of insulation. The ionization caused by the air gap of the cable insulation layer will cause partial overheating, carbonizing the insulation material and reducing the insulation strength. Cable overload is an important factor in cable overheating. Cable installations are located in poorly ventilated areas such as cable-intensive areas, cable trenches, and cable tunnels. There is no useful heat insulation method for the parallel or cross paths of cables and heating pipes. It will overheat the cable and accelerate the damage of the insulation layer.
2. Attachment issues. The center joint and terminal head of the cable are usually completed by the installation personnel at the laying site. If not paying attention, it is very simple to make mistakes. Cable accessory obstruction is the most important part of cable line obstruction, and its macroscopic performance is compound interface discharge and accessory data aging. Obstacles to cable accessories are often caused by poor manufacturing processes and carelessness of personnel. During the manufacturing process, defects such as bubbles, moisture, impurities, etc. appear inside the accessories, causing partial discharge and insulation breakdown.
3. Outer problems. The application of cables in medium and high voltage power grids is more and more extensive. The outer sheath of the power cable is the first line of defense to protect the cable, and its integrity is directly related to the safety of the internal structure and the service life of the cable.







